33,300 sum
Fine-grained gypsum putty. The mixture is intended for interior work in dry rooms, for finishing walls and ceilings for painting and wallpapering. It is used on concrete, cement, gypsum and plastered surfaces.
The base must be solid, dry, free from dirt, dust, oil and bituminious strains that prevent adhesion to the base. Paint coverings must be removed. To prevent a decrease in the adhesion strength with the putty muxture, the bases must be treated with a primer. It is recommended to seal the recesses more than 1 cm with a plaster mortar.
To prepare the solution, pour the dry mixture into a container with clean water (0.45-0.55 L per 1 kg of dry mixture). After filling up, leave the solution for 2-3 minutes and mix until a hamogeneous mass is obtained for 3-5 minutes, then leave the solution for 3 minutes, and mix again. We recommend mixing with a mixer. The prepared portion of the solution should be used up within 60 minutes.
Apply the prepared solution evenly with a spatula on the surface, level and smooth. If necessary, puttying can be done by applying several layers, the next layer is applied after the previous one has completely dried. The dried layer is polished with an abrasive material.
Supplied in bags weighing 20 kg + 2%. Guaranteed sheif life in original packaging in dry rooms is 6 months from the date of manufacture.